Gate Dimensions (per unit)
Imperial: 65 in (H) X 15 in (W)
Metric: 1630 mm X 380 mm
Pedestal Dimensions (gates are mounted in pedestals)
Imperial: 11.42 in (W) X 2.05 in (H)
Metric: 290 mm X 110 mm
Mounting
(4) holes in floor
Imperial: 1/2 x 2 inch holes in floor for pedestal bolts
Metric: 13 mm X 52 mm
Gate Spacing
Gate to Gate
Imperial: 39 inches
Metric: 1 meter
Gates should be mounted no closer than 1 foot from door*.
Metric: >= 300 mm
From side of gate to a wall with any metal surface, minimum distance is 32 inches
Metric: 800 mm
* Prior to installation, EnvisionWare will take electrical interference measurements. In the event that electric door closers or other apparatus causes interference, it may require gates to be installed more than 12 inches from the door.
Metric: 300 mm
Caution about installation near elevator motors, air conditioning and heating equipment or other devices that may cause electrical interference.
Controller Installation
Power
(1) 117VAC outlet 2 amps
Up to 4 gates can be installed to a control unit which is mounted on the wall adjacent to the gates.
The maximum cable distance from any gate to the control unit is 196 inches
Metric: 5 meters
In a typical installation, conduit or floor raceway is installed from the control unit to the first gate then from the first gate to the second gate and so forth. The gate system operates as a self-contained solution. There is no LAN wiring or other connection made to any external devices.
